The product name：SCBH15 amorphous alloy dry-type transformer

Product Description

SCBH15 series amorphous alloy dry-type transformer is a new type of high-efficiency energy-saving transformer. This product combines the advantages of low loss of amorphous alloy materials and the traditional epoxy resin cast transformer in high insulation and mechanical strength. Its core is Made of amorphous alloy strip. Compared with traditional SCB 10 series silicon steel dry-type transformers, no-load loss is reduced by 75-80%, and no-load current is reduced by 80%.

SCBH15 series products comply with national standards GB 1094 "Power Transformer" and GB / T22072 2008 "Technical Parameters and Requirements of Dry-type Amorphous Alloy Core Distribution Transformer".

Features

The core is formed by winding amorphous alloy strip, and the three-phase five-column or three-phase three-column core structure is used as required. The core cross-section is rectangular; the high-voltage coil is a segmented cylindrical coil with thin insulation and vacuum casting , Axial air channel is provided in the large-capacity winding, the coil has a high withstand voltage level, low partial discharge, good dustproof and cooling effect.

The low-voltage coil adopts a foil coil, and the DMD prepreg is heat-cured between the layers, which effectively solves the problem of ampere-turn imbalance when the low-voltage and high-current coil is wound by wire. At the same time, the foil coil does not have an axial winding spiral angle. The axial force that the transformer bears during short circuit is greatly reduced, the process is good, the additional loss is low, and the short circuit resistance is strong; according to the user's needs, it can be equipped with ordinary steel plate, aluminum alloy or stainless steel shell, and the protection grade is IP20, IP23, etc., According to user needs, high and low voltage bus inlet and outlet interfaces can be configured.

Technical performance parameters